This post contains affiliate links. Please read my disclaimer for more information.
Decorated Christmas Tree in 30 min? Yes, this can happen and here is how…
To begin, we used the product Twinkly Pro Generation 2 to make this happen. The twinkly pro comes with wifi controller, 2 way splitter, 2 bundles of lights. Each bundle has 250 lights on each stringer. Pictures are shown below.




There is about 20 feet of lead wire so when making the tree, you can really spread them out which makes a great effect.
First, you will need to plug the lights into the splitter. The tree that is on this video was made with only two of the starter packs! Such a fun way to make the holidays brighter!
The tools that you will need to make this tree are as follows;
First, the umbrella base and a 24′ reach it pole. See image below.

Next, you will need a few ground stakes and and guide wire that will hold the pole firmly to the ground. Ground stakes are shown below.


Above is showing the 8 foot mark.

Above we use the little giant ladder to help string lights. It is useful for so many things. It is the best ladder out there for installing lights.
To strand the lights, it is simple. All you will need to do is get a 6″ pain rollers brush and bend it and stick it at the top. So simple and sturdy.

To keep the lights strands pulled and secured in the ground, we use landscape staples. This is simple and secure.

When we did this the first time it took 30 min. A fun easy easy to install holiday lights at home or commercially and really get ready for the season!
Watch full video at the top to see how this 30 min tree can transform an installment!
We hope this helps have a very bright holiday season!
Leave a Reply