This post contains affiliate links. Please read my disclaimer for more information.
With our LED Christmas lights, you can make holly bushes and hedges look absolutely magical. Read and see how you can make this happen below!
First, the lights we use are incandescent lights. They are completely inclosed into the socket which make them waterproof.
With these mini lights, we start from the bottom of them bush and make our way up. This way, you will not have a whole lot of extra strands of lights. Later in the blog you will see how you can hide the extra lights and make it look clean and professional.
To have less strands and connect the holly bushes and hedge we attach a female end to the male end of the mini lights. We can then start stranding from the bottom and make our way up.
Its very simple from here. Just walking around and keeping a good distance between strands. Also, unplug the the two ends from the bush and hedge so you can easily walk around the bush.
Once, you are not able to reach by hand any longer, use the extension pole to finish the installment. You will also need the hook for the extension pole as well.
While connecting strands, tie the two strands together. This way, there will be no empty spaces throughout the tree. It will look professional and bright!
When you are completed, there will be extra lights. Take the lights behind and hide them in the back of the tree and it will not be noticeable.
Continuing on to the C7 bulbs. First, just lay them on the hedges. Spread them apart and give them good spacing.
After you have laid them and made sure they were evenly spread, clip the bulbs on the leaves of the hedges. The bulbs have a tiny clip on the back and this will secure them. After you had secured them, they are ready to go!
Connect the hedges and bushes with power and there ya go! All festive and ready for the holidays!
Leave a Reply